Navigation: Transactions >> Inventory >> Serial/Lot Link Entry. This window is also available from the GoTo button on MO Entry.
When opened from the GoTo on MO Entry, the MO Number will already be selected.
The upper-left window shows Output serial/lots, and the upper-right window shows Input serial/lots.
Start by clicking on an Output serial/lot to select it. The field will flash blue, and select the serial/lot into the Item Number & Serial/Lot fields above the Inputs window. If the Output serial/lot is already linked to one or more inputs a “link” icon will appear next to the item number.
The bottom window shows existing serial/lot links.
Link Input serial/lots to the selected Output by marking the checkbox next to the Input serial/lot. Depending on your setup options, the Qty Selected may auto-fill (see Lean Mfg Setup). You can edit this quantity if desired. The total quantity selected cannot exceed the quantity available. If setup is not marked for “Use Serial/Lot Linking Qtys” the Qty Selected field will be zero. This allows linking the same Input to several different Outputs.
To break a link, select one or more lines from the bottom window, then click delete. Select multiple rows by holding down CTRL or SHIFT while clicking.
Article is closed for comments.